How to apply vinyl lettering and decals

Here are instructions on how to apply your vinyl lettering or vinyl decals. Vinyl lettering and decals can be purchased from DavetDesigns.com.

Instructions

Your vinyl lettering or decal will come in three layers: clear top layer transfer paper, the vinyl lettering, then the backing.

Carefully and slowly peel the clear transfer paper from the backing. The vinyl lettering should be stuck to the transfer paper.

If the vinyl sticks to the backing, lay that part of the transfer paper down and rub the top of the transfer paper so that the vinyl will stick to it.

Continue to peel the top layer and vinyl “sandwich” from the backing.

You will now have a piece of clear transfer paper with your lettering or decal attached.

Carefully place your sticker “sandwich” onto the clean surface.

Applying firm pressure, smooth your sticker down. If possible, let your sticker set for about an hour. The longer the vinyl is on the surface the stronger the bond of the adhesive will be.

Slowly peel back the transfer tape while gently applying pressure to the vinyl. The vinyl should stay stuck to your surface.

If the vinyl sticks to the transfer paper, lay that part of the transfer paper down and smooth it down. If this happens, it might help to apply pressure with the other hand.

Continue to peel the transfer paper from vinyl.

You’re done! The adhesive will continue to get stronger as the vinyl sets. Please wait 24-48 hours before washing the surface.