Showing posts with label decorating. Show all posts
Showing posts with label decorating. Show all posts

Tuesday, October 15, 2013

Frosted Painted Glass Jack-O-Lantern

Frosted Painted Glass Jack-O-Lantern

My challenge this week (if I choose to accept), involved making something pumpkin-like. We are having a "pumpkin exchange" next week at our Mom's-Night-In Craft Night. Each person will bring a craft pumpkin valued at around $10 to exchange. The instructions said "It doesn't have to be anything specific: glass, plastic, ceramic, burlap, glittery etc." I took that to mean "think outside the box", oh Craft Master. Visions of a glass pumpkin danced in my head. My first thought was to paint the inside of the glass with orange enamel paint and use black vinyl cutouts for the face. However, I have been wanting to do a frosted glass project for quite some time, so there you have it!

You will need:

Frosted Painted Glass Jack-O-Lantern Candy Bowl supplies


Instructions

I purchased the glass bowl from Hobby Lobby for $6.99 minus my 40% off coupon. I ended up having to use some adhesive remover to fully remove the stickers from the bottom of the bowl. Then I washed and dried the bowl.

Frosted Painted Glass Jack-O-Lantern Candy Bowl supplies

Draw your face for the Jack-O-Lantern on the BACKSIDE of the vinyl since it is paper and easier to write on than the vinyl itself. You can use any vinyl you choose, but I used the Oracal 631 Exhibition vinyl since it is a semi-permanent vinyl and easy to peel off. Vinyl is sold at most craft stores or you can buy vinyl online {affiliate link }.

Frosted Painted Glass Jack-O-Lantern Candy Bowl supplies

Cut out your pieces. Peel and stick your vinyl cutouts onto the glass and smooth down firmly.

Frosted Painted Glass Jack-O-Lantern Candy Bowl supplies

Take you bowl outside and spray paint the outside of the bowl. Use newspaper or something similar underneath. Follow the directions on the spray can for correct use. This was my first go round with frosted spray paint. I used Krylon Frosted Glass Finish purchased from Michael's for $9.99 minus my 40% off coupon. I did use almost half the small can for this one bowl. I sprayed 2 coats waiting about an hour between each coat. {My husband spray painted the second coat so I could take this picture :)}

Frosted Painted Glass Jack-O-Lantern Candy Bowl supplies

Let your pumpkin fully dry (about an hour). Bring inside and carefully peel off the vinyl. The frosted paint WILL scratch off.

Frosted Painted Glass Jack-O-Lantern Candy Bowl

VoilĂ ! This was a very quick and easy project that I think came out better than expected. Total cost was $10.18 plus tax, but I had enough spray paint to do a little over 2 projects, bringing the total down to $7.19 plus tax. I would imagine had I shopped around, I could have gotten a glass bowl at the dollar store for much cheaper, but I am on a time crunch. This would make a perfect hostess gift or any occasion present. Fill it with candy, potpourri, etc. before you give as a gift for that little something extra, or what we from Louisiana call "lagniappe"!


Bridget Davet / Davet Designs

Using the affiliate links in this blog to make purchases helps support my site. Thank you in advance!

Saturday, October 20, 2012

Frosted Painted Glass Jack-O-Lantern Candy Bowl


 
My challenge this week (if I choose to accept), involved making something pumpkin-like. We are having a "pumpkin exchange" next week at our Mom's-Night-In Craft Night. Each person will bring a craft pumpkin valued at around $10 to exchange. The instructions said "It doesn't have to be anything specific: glass, plastic, ceramic, burlap, glittery etc." I took that to mean "think outside the box", oh Craft Master. Visions of a glass pumpkin danced in my head. My first thought was to paint the inside of the glass with orange enamel paint and use black vinyl cutouts for the face. However, I have been wanting to do a frosted glass project for quite some time, so there you have it!

You will need: 

Note: As an Amazon Associate I earn from qualifying purchases. I may earn a commission from purchases made through these links.

 

Instructions

I purchased the glass bowl from Hobby Lobby for $6.99 minus my 40% off coupon. You can also purchase one from Amazon. I ended up having to use some adhesive remover to fully remove the stickers from the bottom of the bowl. Then I washed and dried the bowl.



Draw your face for the Jack-O-Lantern on the BACKSIDE of the vinyl since it is paper and easier to write on than the vinyl itself. You can use any vinyl you choose, but I used the Oracal 631 Exhibition vinyl since it is a semi-permanent vinyl and easy to peel off. Vinyl is sold at most craft stores or you can buy vinyl online including Amazon. 


 Cut out your pieces. Peel and stick your vinyl cutouts onto the glass and smooth down firmly.



Take you bowl outside and spray paint the outside of the bowl. Use newspaper or something similar underneath. Follow the directions on the spray can for correct use. This was my first go round with frosted spray paint. I used Krylon Frosted Glass Finish that you can purchase from Amazon. I did use almost half the small can for this one bowl. I sprayed 2 coats waiting about an hour between each coat. {My husband spray painted the second coat so I could take this picture :)}



Let your pumpkin fully dry (about an hour). Bring inside and carefully peel off the vinyl. The frosted paint WILL scratch off.

VoilĂ ! This was a very quick and easy project that I think came out better than expected. Total cost was $10.18 plus tax, but I had enough spray paint to do a little over 2 projects, bringing the total down to $7.19 plus tax. I would imagine had I shopped around, I could have gotten a glass bowl at the dollar store for much cheaper, but I am on a time crunch. This would make a perfect hostess gift or any occasion present. Fill it with candy, potpourri, etc. before you give as a gift for that little something extra, or what we from Louisiana call "lagniappe"!







Tuesday, September 11, 2012

Basic Chipboard Decoration - Scrabook Paper

Decorating chipboard letters and frames is one of my favorite crafts. The results of this inexpensive, yet simple project, are amazing. There are countless project you can make using this basic technique. I will be uploading projects frequently under the tag of "chipboard letters".

You will need:


Note: As an Amazon Associate I earn from qualifying purchases. I may earn a commission from purchases made through these links.

Step 1



Paint the BACK, sides and just a tad of the front of the chipboard letter with acrylic craft paint. Wait 10 minutes and paint a second coat. Pick a color that matches/coordinates with your paper.


Step 2



With a hard bristled paint brush, brush the BACK of your scrapbook paper with Mod Podge. {Note: I was using a double sided paper. The striped side is my front.} It is best to use a semi-thick or thick paper. My favorite is Stampin' Up's paper. If the paper is too thin, it will tend to tear while cutting when it gets wet from the Mod Podge.


Step 3



Place the chipboard letter onto the paper immediately. Remember to put the FRONT of the letter (the unpainted side) facing the paper. Press firmly.


Step 4



Turn the paper and letter over. Smooth down the paper onto the chipboard letter, pressing down slightly over the sides. Let dry about 10 minutes.


Step 5



Turn the covered chipboard letter over. With a very sharp X-Acto knife, trim the paper from the chipboard letter.



If your X-Acto knife if not very sharp (mine was not very sharp and I was out of replacements), the paper will tear {as you can see in the picture, but covered up well enough for this project.}


Step 6

 
 Finished Letter


Tap your sponge several times onto your stamp pad. If you are using a new sponge, it might not look like you have any ink on your sponge, but you do. Choose a color that matches the color you painted the back of your letter. Dab your sponge on the edge of the letter in a dab - then drag toward the edge motion. Repeat around all edges. You can use as much or as little ink as you'd wish to get the desired effect. Inking the edges will give your letter a finished look.



Your chipboard letter is now finished! You can add embellishments if you like or use them just the way they are.



Using the affiliate links in this blog to make purchases helps support my site. Thank you in advance!

Related Posts Plugin for WordPress, Blogger...